How to cover the nail varnish?

What we need to cover the nail varnish?

- Degreaser - designed to remove grease and dirt from the nail plate for a better grip with varnish;

- Base coat - used for better adhesion of nail from the nail plate and prevents yellowing nail varnish from pigments;

- Directly colored coating;

- Surface finish - is intended to impart a glossy shine, color protection coating to impart a specific effect (eg with mother of pearl and so on.)

- A small jar;

- A liquid containing acetone (the same nail polish remover);

- Brush speakers - Kolinsky pile smooth and elastic, it was he more than anyone better suited for sanitized cuticle and side bolsters of the nail;

- Napkins;

- Drying.

First you need to degrease the nail plate and let degreaser to evaporate.

Next, carefully plot the basic coverage as close to the cuticle and side bolsters. If necessary, the lateral pull the roller to be coated close to the skin. Seal the end, that is, go to the base of a semi-dry brush on the end face of the nail. This will allow the polish last longer. Allow to dry completely base - it will also increase wearing time of varnish.

Next we put the color scheme:

Follow Steps 4 and 5 do not forget to put off the side bolsters to come as close to the color of the skin. Turn the brush so that the brush area passed along the cuticle and side bolsters. Then you will be less likely to grease surface. Do not forget the end. We cover all the nails in turn, do not cover one nail at once in two layers. Allow the layers to dry time. If lubricated coating, take a brush, soak it in acetone, slightly press on the cloth and wipe oiled place as long as there will be traces of varnish.

Cover the nail a second layer of varnish on the same lines. When covering the second layer of varnish recruit more fatty droplets, because we need to show the color of the first layer. If the varnish again get on your skin, use a brush again. Brush much better nail corrector, cotton swab, etc. Please note that this brush, providing the best in quality and speed cleaning result lubricate varnish. It is also important that a fresh nail removed much easier to have dried up, so remove all the excess immediately. On the second layer coat with no end!

What is interesting brush? just a brush, you can make a perfect line of nail polish from the cuticle. Be sure to wipe the brush after each touch of varnish, so as not to smear paint.

Finally topcoated, take a drop too good, but certainly not so that flowed around the nail. Flaws can also remove brush.

Apply drying, it will accelerate the rate of drying varnish. If you have a good varnish and drying, and if you apply varnish in thin layers, then your nail polish to dry for 10-20 minutes. Just be patient, include a good pass and calmly wait for the complete drying of the coating!

Classic manicure

To perform classic manicure we will need:

- clipper manicure and/or cuticle scissors

- cuticle pusher

- manicure Spa bath

- warm water

- liquid soap or any special tool for baths

- remover cuticle

- nail file for natural nails

- grinder

- polisher

Shape the free edge. Most compare the length and give the same shape of the free edge. The file is held perpendicular to the free edge. Motion files from the corners of the nail to the center, filing in this way helps to prevent splitting of nails in the future.

How to determine the same length? Applied in turn to each other forefinger, middle and ring fingers. The distance from cuticle to free edge on all three fingers should be identical. The nail on his little finger should be about 1 mm shorter than the nails on these three fingers, the nail of the thumb is 1 mm long. Compare the length on both hands.

Back on dry cuticles dealer. Soak hands in the tub after soaking again pushing the cuticle, and then the axe just loop along the cuticle. The hatchet should fully stand on the nail plate. In any case, do not place the axe on the edge in any traumerei nail plate, at least leave scratches. From corner to corner of the nail with the passage of the hatchet nothing is supposed to do, if it does then you are well cleanse the nail plate, preparing it to work with scissors or wire cutters.

Apply to cuticle remover, endured the allotted time and put your hand in the tub of water.

Next, we will need scissors with rounded tips. These scissors are made specifically for removing the cuticle.

Spouts of scissors we grab the skin in the region of sine (angle of the nail near the cuticle). Note that the cutting blade of the scissors should be perpendicular to the nail plate. Do not flame them forward or back, otherwise you will get poor quality cut. Why poor? When the scissors is in the proper position, then the regrowth cuticle is smooth. And if the scissors will be inundated, the different layers of the skin will grow back in different ways, as well as leather will be thin, then thick, then thin it may break. As a result, you get a lot of unpleasant problems in the form of burrs.

Carefully processed cuticle scissors. try to cut the cuticle of one slice. That is not several pieces, and one. You should cut a thin strip of skin.

Now you need to check how well the processed area of the cuticle. To do this, you need to pull the skin in the direction opposite to the growth of the cuticle. So you see, I totally removed the dead skin. If you have something left, but you can modify this plot cutters.

If your cuticle is small, then please note that you will not be able to handle it with scissors. Therefore, it is necessary to use pliers. Fabric cutters, as well as the blade of the scissors should stand perpendicular to the nail plate. Also, if you are uncomfortable to run with scissors, you can use the wire cutters.

When processing the skin in the area of side rollers, the tool is cutting cloths to the nail plate. Pull the side bolsters to thoroughly remove dead skin. Work translational motions, not looking up from the skin. Only then will smooth skin without burrs. Don't tear the skin. If the skin is torn, it means that it is poorly sharpened and they cannot work.

After you have finished processing, do not apply cuticle oil at once, as it camouflages all possible flaws. Wait until dry hands and you will see what and where you have left unfinished. If you saw that, still something remains, moisten a finger or apply remover, and then modify the required sections.

Then apply oil or proceed to the varnish or gel polish.

How to prolong varnish life?

Remember once and for all - the base and a top have to be used always! Base besides that increases a covering hitch with a nail also protects a nail from pigmentation. Of course pigmentation can be removed with the grinder but what will become with a nail which is ground constantly? Correctly, will turn into a rag! Therefore - base, base and once again base! The top as a rule reduces time of drying of all layers a varnish, gives additional protection and gloss for a varnish, and also prevents a skalyvaniye. Before base obligatory degreasing of a nail. If on a surface of a nail there are oils, the varnish will be quicker torn away. It is possible to degrease a nail it is banal liquid for removal of a varnish. Well and of course, a varnish have to be qualitative. At least base. Let color will cost 15 rubles, but the basis has to be qualitative, after all long duration of a covering depends on it in the most part. And for those who doesn't like to change often a covering, welcome to a subject about gel varnishes.