How to cover the nail varnish?

What we need to cover the nail varnish?

- Degreaser - designed to remove grease and dirt from the nail plate for a better grip with varnish;

- Base coat - used for better adhesion of nail from the nail plate and prevents yellowing nail varnish from pigments;

- Directly colored coating;

- Surface finish - is intended to impart a glossy shine, color protection coating to impart a specific effect (eg with mother of pearl and so on.)

- A small jar;

- A liquid containing acetone (the same nail polish remover);

- Brush speakers - Kolinsky pile smooth and elastic, it was he more than anyone better suited for sanitized cuticle and side bolsters of the nail;

- Napkins;

- Drying.

First you need to degrease the nail plate and let degreaser to evaporate.

Next, carefully plot the basic coverage as close to the cuticle and side bolsters. If necessary, the lateral pull the roller to be coated close to the skin. Seal the end, that is, go to the base of a semi-dry brush on the end face of the nail. This will allow the polish last longer. Allow to dry completely base - it will also increase wearing time of varnish.

Next we put the color scheme:

Follow Steps 4 and 5 do not forget to put off the side bolsters to come as close to the color of the skin. Turn the brush so that the brush area passed along the cuticle and side bolsters. Then you will be less likely to grease surface. Do not forget the end. We cover all the nails in turn, do not cover one nail at once in two layers. Allow the layers to dry time. If lubricated coating, take a brush, soak it in acetone, slightly press on the cloth and wipe oiled place as long as there will be traces of varnish.

Cover the nail a second layer of varnish on the same lines. When covering the second layer of varnish recruit more fatty droplets, because we need to show the color of the first layer. If the varnish again get on your skin, use a brush again. Brush much better nail corrector, cotton swab, etc. Please note that this brush, providing the best in quality and speed cleaning result lubricate varnish. It is also important that a fresh nail removed much easier to have dried up, so remove all the excess immediately. On the second layer coat with no end!

What is interesting brush? just a brush, you can make a perfect line of nail polish from the cuticle. Be sure to wipe the brush after each touch of varnish, so as not to smear paint.

Finally topcoated, take a drop too good, but certainly not so that flowed around the nail. Flaws can also remove brush.

Apply drying, it will accelerate the rate of drying varnish. If you have a good varnish and drying, and if you apply varnish in thin layers, then your nail polish to dry for 10-20 minutes. Just be patient, include a good pass and calmly wait for the complete drying of the coating!