Artificial nails. Theory. staging forms

Consider the type of nail with all important for modeling the parties.

We look at the top of the figure. It depicts the structure of the artificial nail.

Apex - the highest point of the artificial nail, as well as the highest point of the zone of stress. Apex - one of the main elements responsible for the strength of the nail. That is, it accounts for the maximum load.

Nail in any case should not be too thick in the area of stress. Thicker does not mean stronger. Besides these nails do not look aesthetically pleasing, we can say awful - thick slabs)))

In the first photo we see that the longitudinal arch of the nail is smooth and even, but the visible bend.

On the second photo is a smooth line from the cuticle to the apex and from the apex to the end of the free edge of the longitudinal arch is parallel to the bottom parallel (oil oil) nail.

The bottom (side) parallel nail (1). Clearly continues to correct line growth of natural nails. Both lines are on the same line (2) and parallel to each other strictly.

Hairline (3) parallel to the transverse arch of the nail. Must be flat, smooth and have the same thickness (approximately equal to the thickness of a credit card) all over.

If we look into the end of the nail having a smooth curve of the longitudinal arch, we see the apex. If the arch is parallel to the bottom parallels, then you will not see the apex.

Red denotes the natural fingernail and cuticle at the side bolsters, which have artificial material in order to prevent delamination of the material. In this zone, the transition of the material in the natural nail to be unnoticeable, there should be no step should not cling to nothing.

Formulation forms. After preparing the nails to build production runs forms. Statement of forms depending on the form of natural nails and future forms of artificial nails.

In the first photo shows the nails with a slight curve in the transverse arch and semicircular hyponychium.

This is the easiest form for setting nails. To form such nails are cut only in depth, which depends on the roundness of the hyponychium. If you have a high side bolsters, then on the form for better performances can be cut "ears". On the form, they look like this:

The second image shows the nails having defined longitudinal arch where a range of 40-50% of the hyponychium and of the straight line.

In this case, the width of the cut form, if you wish, you can also trim tabs, as usual in this form of nail side bolsters heavily favored over the height of the nail plate.

The third case is the most difficult, so hyponychium in these nail grows strongly and beyond the fingertip. In addition, these nails have a bend transverse arch in 50% of the circle. Therefore it is necessary to cut the shape and depth, and width. Typically in such high polish side bolsters does not happen, so cut the ears are not required.

Next we see the angle setting form.

If we want a salon square or oval shape is put straight, clear extension of the natural nail.

Exception: nails growing up - a form slightly down fingernails growing down - shape up a little. In both cases, the maximum remove the free edge.

If we want a classic almond or stiletto, the form is placed with a slope down to about 15 degrees.

Exception: nails, growing up - a form of drops even lower, nails growing down - form placed exactly. In both cases, the maximum remove the free edge.

If we want to create arched nails or non-standard form, form bullied up to create a steep arch.

Exception: nails, growing up - do not turn up their form up too (not only that nails will zadratye, it will spoil the architecture and affect the durability and wearability nails); fingernails growing down - put form above normal.

The problem of extension of nails: crack, breaking, loose

Cracks emerge as a consequence of strikes naroshchennymi nails on a hard surface, in case you will be hooked and pulls a nail (in this case, it may be scrapped), with substandard or incompatible materials may burst finish.

Cracks on the sides of the artificial nail near the free edge of the natural nail caused by inappropriate forms of substitution in the modeling of the nail, when properly constructed architecture, when you saw in two sides. There are so-called jackdaws. Corrected the correct form and correct statement of sawdust.

Diagrams of are due to cracks, as a consequence of shocks or any other force effects on the nail. When properly constructed architecture artificial nail scrapping can come off with his! With the bed and "meat"!

Exfoliated primarily arise due to ill-prepared natural nail. It is important to completely remove the pterygium, because it is so to speak dead skin, which departs from the nail. If the overlay material at her, then at the commencement of the pterygium from the natural nail, automatically moves and stuff! Thoroughly cook nails to procedures!

The second reason was peeled off - it got to the cuticle and side bolsters material. On live healthy skin material does not hold, so when regrowth lag behind skin material swells on the surface of the nail and provokes further exfoliated.

Third, the most rare, it includes about 1.5% of the people - this idiosyncrasy materials, some pregnant women, in some patients taking antibiotics, or "strong" medication. Rejection of material occurs in any case, can moreover be all materials. But it is worth trying to pick up. But it nairedchayshie cases. It all depends on the master and client relationships to the nails. Nails are not a means for opening cans, bottles, packages and so on. They also like the natural nail has a tensile strength. So be careful before you blame the wizard. Perhaps this is your fault.

Every cause has already carries the solution to the problem, so you can deal with it easily enough if you care! :-)
Ошибка?

A little about the nail. Tips and forms

"Nail" in my opinion the term is controversial. So, when are tips you can talk about the building, because the whole shape of the free edge sets us tips and change we can not do anything. What to change - if, for example, the nail grows down, then when gluing tips we get quite "pull of his hooked" nail and tipson we don't fix it.

Then help us come form. With their form-we can fix any nails and give them a perfect shape. In this case, we are talking not only about growing the free edge, but also the simulation of the ideal form.

Hence, a new term - nail modeling.

What do we get up? The nail is lengthening nail with the help of tips. And nail modeling is the correction of the natural shape of the nail and bringing it up to the ideal form for nail extension.

The modeling technology is much more complex than building on tips. But there is no limit of human possibilities =)

Nail tips.

After standard preparation procedures nails to build up comes the solemn moment of bonding))))

But before that, we need to pick up tips by size for each nail. No more, no less - any deviation from the norm affects the integrity of the architecture of the artificial nail, and consequently on his nakabalot.

Apply glue to the tips on the nail and on the tips. Gently, putting tips at an angle of 45 degrees, stick it to your nail, releasing all the air. After gluing under tipson should be no air bubbles!

Consider the following picture:

1. Photo number 7 - example of correct selection and gluing tips to the nails. Boca tips from one of the sinus to the other, without air bubbles.

2. Next you need to shorten tips to correct length.

3. Definitely cut down type C in the area of its intersection with the natural nail, BUT! Be careful not to saw the natural nail! It has already been prepared and re-processing of files is not needed.!.

4. Matiram the remainder of tips nail file and write the approximate shape the future of the nail.

The nail is ready for the subsequent deposition of material!

Form.

Perfect nail does not happen, but everything can be improved. Forms.

When setting forms consider the following points:

1. No gaps!(Photo By Irina Shakhova)

2. The shape is slightly narrower than the natural nail

3. The basic principles of installation form

The first staging forms for arch forms, as well as for down-growing nails.

The second statement of the form - cabin square, oval
The third production of the form - almonds, stiletto, franlinabrona nails.

4. The following nuances 
- irregular, broad, irregular shape of the natural nail forces the wizard to cut the shape for tight installation to the natural nail. An example of a cutting form under an elongated, oval shape nail with the rampant hyponychium:

- high side bolsters and/or wide of the nail plate

Such nuances lot, under each specific case shape is cut out in its own way. The main thing that she was standing exactly on the axis of the finger, without gaps, already the natural nail (not to get flared or kegs) and most importantly - according to the chosen form of artificial nail. Because if almonds put the form exactly, when viewed from the side will not almonds, and a duck's beak.

What conclusion can be drawn? Forms we can fix any nails and turn them into candy.

And before you will read further, I would like to make you think - is it so harmful and bad building? (Photo and the work of Natalia the Abdullin G. K)

TO

AFTER