Discontent reasons gel polishes

The first most frequent and most important reason of discontent gel polishes - chips from free edge.

Why it arises? And all because of the wrong physical and chemical preparation of a natural nail. In most cases the nail needs to be processed a soft baff. Simply to remove luster, but not to cut a nail till it bleeds or to thin a natural nail in hope that the covering will keep more long. Luster is removed for removal of a fat film from a nail and the best penetration of preparatory means for processing of a nail plate.

After physical preparation of a nail - moving away/removal of a cuticle, removal a pterigiya and processings of a nail baffy we start chemical preparation of a nail. For a start we degrease a nail a dehydrator. The dehydrator deletes excess of fat from a nail for the best coupling gel varnish with a nail plate. Surely we process also a nail end face! There too will be a material which is responsible for long duration of a covering.

After we process a nail plate a primer. The primer works as a bilateral adhesive tape, also increasing coupling of material with a nail. Surely we process an end face! Always! Each preparation we process a nail end face! Time covering socks depends on it.

And at last we put a basic covering. It is best of all to put on one finger with a konveer, properly sealing free edge. We dry in a lamp.

Everything, competent preparation of a nail is ended. Possible chips are warned.

The second possible reason of discontent with a covering are cracks.

It is a problem we arise because of use of solid gels with the soft. For example a covering the finish from solid gels for building gel varnishes. Solid gels in difference from soluble not plastic, but the nail plate has property to move. Therefore solid gel holds all covering, and it moves together with a nail and bursts. Therefore the finish whole, and the color covering which cracked. For socks it isn't terrible, but a look not esthetic, especially on light flowers.

Also it can happen because of a covering on thin nails.

The third and most rare problem - I departed material at a cuticle.

As a rule it also I didn't depart material, and material which flowed on a cuticle puffs up. And at growth it becomes visible. To eliminate easy as a pie - accurate putting material. And if after all flowed - accurately cut numb material a nail file or the device if you own equipment of hardware manicure.

Similar materials

The standard procedure for preparing the nails for the coating.

How it is easy to remove gel polish?

The materials used for a covering of nails gel polish

The standard procedure for preparing the nails for the coating.

The gel Polish was kept for at least two weeks (only better, but then the view is already not aesthetic), before applying the colored coating is necessary to prepare the natural nail.

1. Cooking gyros on the beach. It is possible to make the hardware. So you kill two birds with one stone manicure without soaking plus get rid of the pterygium. But hardware nail preparation requires certain skills, in their absence, you can easily injure the nail or the matrix. Therefore, manicure hardware can be replaced classic or simply push back the cuticle pusher and a hatchet to remove the pterygium. Like in this video:

2. If the manufacturer has not specified otherwise, pass on the soft nail buff, to get the Shine. Try not to cut the nail with a nail file! You can injure him! Usually all manufacturers, except Shellac, you want to go nail buff. 

3. Degrease the nail dehydrator 

4. Apply primer for gel or gel Polish. And on the ends too! If your nail is not too thin, not too wet hands do not sweat a lot and after degreasing your nail is opaque, you can't use a primer.

5. Apply base for gel Polish, sealing the end of the nail. Dry them in the lamp 36 watt 1-2 minutes.

Directly colored coating is applied in two or three layers (depending on the density of the color) semi-dry brush. First, it avoids unnecessary the thickness and make the coating is virtually indistinguishable from the lacquer coating is simple, and secondly, when coating a thick layer of it will be blown up in the lamp and will not dry out until the end and will have the effect of cake.

There are some firms gel polishes that have a very large amount of the dispersion layer. Therefore, before applying color coating is to go through our database with a clean, dry brush to remove excess dispersion and color did not spread. 

Only top apply thicker than other layers, as it has a protective function and adds Shine. 

Also before or after top coating can be performed design gel polishes, gel inks or acrylic paints.