Showing posts with label gel polish. Show all posts
Showing posts with label gel polish. Show all posts
Wednesday, April 1, 2015
Wednesday, February 25, 2015
Classic manicure
To perform classic manicure we will need:
- clipper manicure and/or cuticle scissors
- cuticle pusher
- manicure Spa bath
- warm water
- liquid soap or any special tool for baths
- remover cuticle
- nail file for natural nails
- grinder
- polisher
Shape the free edge. Most compare the length and give the same shape of the free edge. The file is held perpendicular to the free edge. Motion files from the corners of the nail to the center, filing in this way helps to prevent splitting of nails in the future.
How to determine the same length? Applied in turn to each other forefinger, middle and ring fingers. The distance from cuticle to free edge on all three fingers should be identical. The nail on his little finger should be about 1 mm shorter than the nails on these three fingers, the nail of the thumb is 1 mm long. Compare the length on both hands.
Back on dry cuticles dealer. Soak hands in the tub after soaking again pushing the cuticle, and then the axe just loop along the cuticle. The hatchet should fully stand on the nail plate. In any case, do not place the axe on the edge in any traumerei nail plate, at least leave scratches. From corner to corner of the nail with the passage of the hatchet nothing is supposed to do, if it does then you are well cleanse the nail plate, preparing it to work with scissors or wire cutters.
Apply to cuticle remover, endured the allotted time and put your hand in the tub of water.
Next, we will need scissors with rounded tips. These scissors are made specifically for removing the cuticle.
Spouts of scissors we grab the skin in the region of sine (angle of the nail near the cuticle). Note that the cutting blade of the scissors should be perpendicular to the nail plate. Do not flame them forward or back, otherwise you will get poor quality cut. Why poor? When the scissors is in the proper position, then the regrowth cuticle is smooth. And if the scissors will be inundated, the different layers of the skin will grow back in different ways, as well as leather will be thin, then thick, then thin it may break. As a result, you get a lot of unpleasant problems in the form of burrs.
Carefully processed cuticle scissors. try to cut the cuticle of one slice. That is not several pieces, and one. You should cut a thin strip of skin.
Now you need to check how well the processed area of the cuticle. To do this, you need to pull the skin in the direction opposite to the growth of the cuticle. So you see, I totally removed the dead skin. If you have something left, but you can modify this plot cutters.
If your cuticle is small, then please note that you will not be able to handle it with scissors. Therefore, it is necessary to use pliers. Fabric cutters, as well as the blade of the scissors should stand perpendicular to the nail plate. Also, if you are uncomfortable to run with scissors, you can use the wire cutters.
When processing the skin in the area of side rollers, the tool is cutting cloths to the nail plate. Pull the side bolsters to thoroughly remove dead skin. Work translational motions, not looking up from the skin. Only then will smooth skin without burrs. Don't tear the skin. If the skin is torn, it means that it is poorly sharpened and they cannot work.
After you have finished processing, do not apply cuticle oil at once, as it camouflages all possible flaws. Wait until dry hands and you will see what and where you have left unfinished. If you saw that, still something remains, moisten a finger or apply remover, and then modify the required sections.
Then apply oil or proceed to the varnish or gel polish.
- clipper manicure and/or cuticle scissors
- cuticle pusher
- manicure Spa bath
- warm water
- liquid soap or any special tool for baths
- remover cuticle
- nail file for natural nails
- grinder
- polisher
Shape the free edge. Most compare the length and give the same shape of the free edge. The file is held perpendicular to the free edge. Motion files from the corners of the nail to the center, filing in this way helps to prevent splitting of nails in the future.
How to determine the same length? Applied in turn to each other forefinger, middle and ring fingers. The distance from cuticle to free edge on all three fingers should be identical. The nail on his little finger should be about 1 mm shorter than the nails on these three fingers, the nail of the thumb is 1 mm long. Compare the length on both hands.
Back on dry cuticles dealer. Soak hands in the tub after soaking again pushing the cuticle, and then the axe just loop along the cuticle. The hatchet should fully stand on the nail plate. In any case, do not place the axe on the edge in any traumerei nail plate, at least leave scratches. From corner to corner of the nail with the passage of the hatchet nothing is supposed to do, if it does then you are well cleanse the nail plate, preparing it to work with scissors or wire cutters.
Apply to cuticle remover, endured the allotted time and put your hand in the tub of water.
Next, we will need scissors with rounded tips. These scissors are made specifically for removing the cuticle.
Spouts of scissors we grab the skin in the region of sine (angle of the nail near the cuticle). Note that the cutting blade of the scissors should be perpendicular to the nail plate. Do not flame them forward or back, otherwise you will get poor quality cut. Why poor? When the scissors is in the proper position, then the regrowth cuticle is smooth. And if the scissors will be inundated, the different layers of the skin will grow back in different ways, as well as leather will be thin, then thick, then thin it may break. As a result, you get a lot of unpleasant problems in the form of burrs.
Carefully processed cuticle scissors. try to cut the cuticle of one slice. That is not several pieces, and one. You should cut a thin strip of skin.
Now you need to check how well the processed area of the cuticle. To do this, you need to pull the skin in the direction opposite to the growth of the cuticle. So you see, I totally removed the dead skin. If you have something left, but you can modify this plot cutters.
If your cuticle is small, then please note that you will not be able to handle it with scissors. Therefore, it is necessary to use pliers. Fabric cutters, as well as the blade of the scissors should stand perpendicular to the nail plate. Also, if you are uncomfortable to run with scissors, you can use the wire cutters.
When processing the skin in the area of side rollers, the tool is cutting cloths to the nail plate. Pull the side bolsters to thoroughly remove dead skin. Work translational motions, not looking up from the skin. Only then will smooth skin without burrs. Don't tear the skin. If the skin is torn, it means that it is poorly sharpened and they cannot work.
After you have finished processing, do not apply cuticle oil at once, as it camouflages all possible flaws. Wait until dry hands and you will see what and where you have left unfinished. If you saw that, still something remains, moisten a finger or apply remover, and then modify the required sections.
Then apply oil or proceed to the varnish or gel polish.
Monday, February 16, 2015
Reasons peeling artificial nails
Most important - is the proper preparation of nails to build you should carefully push the cuticles and remove the pterygium.
Attention should also be paid to people with high side bolsters. Because in such cases often arise detachment. In cuticle much easier to get rid of detachments than the lateral ridges. So when you remove the pterygium carefully pull the side bolsters of the nail plate and thoroughly scrub pterygium hatchet trimmed pusher and nail file. Then you finally will remove the most common cause of peeling of artificial nails.
Next, carefully degrease the nail plate. If you or your client's hands are wet, you should not degrease both hands at once. Better handle on two fingers.
The same situation is with the primer. In the case of wet hands treatment is carried out on one or two fingers. Incidentally, in the case of very wet hands, you can use a combination of acid + acid-free primer. Try not to get a primer on the skin, it at least will cause irritation. Also do not use large amounts of primer.
The next point is the proximity of the material to the cuticle and side bolsters. the material should not reach them where 1 mm. If the material to flow to the skin, it will inevitably lead to detachment. You can put stuff as carefully as possible, so you do not have to cut a lot.
Sawdust. Take care to have the cuticle and side bolsters material comes to naught. This prevents the detachment, as the material is laid at a distance from the skin and at the same time is thin enough. Try also not to saw the material, because too thin coating also leads to a rejection of the material.
Finally topcoat. Do not go for the finish of the material already available, especially if you are using the finish without adhesive layer.
Be careful and accurate and you will forget about all loose.
Wednesday, January 28, 2015
The problem of extension of nails: crack, breaking, loose
Cracks emerge as a consequence of strikes naroshchennymi nails on a hard surface, in case you will be hooked and pulls a nail (in this case, it may be scrapped), with substandard or incompatible materials may burst finish.
Cracks on the sides of the artificial nail near the free edge of the natural nail caused by inappropriate forms of substitution in the modeling of the nail, when properly constructed architecture, when you saw in two sides. There are so-called jackdaws. Corrected the correct form and correct statement of sawdust.
Diagrams of are due to cracks, as a consequence of shocks or any other force effects on the nail. When properly constructed architecture artificial nail scrapping can come off with his! With the bed and "meat"!
Exfoliated primarily arise due to ill-prepared natural nail. It is important to completely remove the pterygium, because it is so to speak dead skin, which departs from the nail. If the overlay material at her, then at the commencement of the pterygium from the natural nail, automatically moves and stuff! Thoroughly cook nails to procedures!
The second reason was peeled off - it got to the cuticle and side bolsters material. On live healthy skin material does not hold, so when regrowth lag behind skin material swells on the surface of the nail and provokes further exfoliated.
Third, the most rare, it includes about 1.5% of the people - this idiosyncrasy materials, some pregnant women, in some patients taking antibiotics, or "strong" medication. Rejection of material occurs in any case, can moreover be all materials. But it is worth trying to pick up. But it nairedchayshie cases. It all depends on the master and client relationships to the nails. Nails are not a means for opening cans, bottles, packages and so on. They also like the natural nail has a tensile strength. So be careful before you blame the wizard. Perhaps this is your fault.
Every cause has already carries the solution to the problem, so you can deal with it easily enough if you care! :-)
Ошибка?
Cracks on the sides of the artificial nail near the free edge of the natural nail caused by inappropriate forms of substitution in the modeling of the nail, when properly constructed architecture, when you saw in two sides. There are so-called jackdaws. Corrected the correct form and correct statement of sawdust.
Diagrams of are due to cracks, as a consequence of shocks or any other force effects on the nail. When properly constructed architecture artificial nail scrapping can come off with his! With the bed and "meat"!
Exfoliated primarily arise due to ill-prepared natural nail. It is important to completely remove the pterygium, because it is so to speak dead skin, which departs from the nail. If the overlay material at her, then at the commencement of the pterygium from the natural nail, automatically moves and stuff! Thoroughly cook nails to procedures!
The second reason was peeled off - it got to the cuticle and side bolsters material. On live healthy skin material does not hold, so when regrowth lag behind skin material swells on the surface of the nail and provokes further exfoliated.
Third, the most rare, it includes about 1.5% of the people - this idiosyncrasy materials, some pregnant women, in some patients taking antibiotics, or "strong" medication. Rejection of material occurs in any case, can moreover be all materials. But it is worth trying to pick up. But it nairedchayshie cases. It all depends on the master and client relationships to the nails. Nails are not a means for opening cans, bottles, packages and so on. They also like the natural nail has a tensile strength. So be careful before you blame the wizard. Perhaps this is your fault.
Every cause has already carries the solution to the problem, so you can deal with it easily enough if you care! :-)
Ошибка?
Tuesday, January 20, 2015
Preparation of natural nails to build
Actually I personally while preparing for increased use nail technology training coated nail gel polish. And use it as a gel, and under acrylic. About the features of later, but for now just on the standard procedure for the preparation of nails to build.
1. This item is used in general for any procedure with hands and feet. For your own safety and the safety of the client you have to treat your hands and the hands of the customer antiseptic. IMPORTANT POINT: If you are wearing gloves, then you put antiseptic on your hands, wear gloves and treat them as an antiseptic.
2. Move aside the cuticle. Orange stick will not work, especially if the cuticle is overgrown and tight to the nail. Hatchet remove pterygium. If you own the hardware manicure appliances, you can facilitate and accelerate its work using a cutter.
3. File for natural nails remove the free edge of the natural nail and remove the gloss from the nail. Remove gloss it means SLIGHTLY dull the surface of the nail. If you are unsure of your hands, take a hard buff. Too much you will not remove them.
If the building is carried out on the tips, but now it's time to glue them and treat.
4. Remove dust from the nail. Degrease the nail dehydrator.
- If the building is done with acrylics, then take an acidic primer. Although now there are acid-free acrylic primers.
- If the capacity is performed gel, then take acid-free primer
What is the difference acidic and acid-free primers? Acidic primer raises flakes natural nail that allows the material to better catch on. Acid-free primer acts as a double-sided tape, a material with interlocking nail plate.
If you build on the tips, the primer is applied only to the natural nail. In case of contact tips, nail tip could crack!
Regarding the preparation of nails to build on the training system to cover the nail gel polish. In gel lacquer base stronger adhesion compared with the base for a solid gel that eliminates detachment even in the most troubled clients! Besides it is possible to eliminate the primer is sufficient degreasing.
Note: When using the gel lacquer base under the acrylic is recommended to remove her sticky layer.
Monday, January 19, 2015
A little about the nail. Tips and forms
"Nail" in my opinion the term is controversial. So, when are tips you can talk about the building, because the whole shape of the free edge sets us tips and change we can not do anything. What to change - if, for example, the nail grows down, then when gluing tips we get quite "pull of his hooked" nail and tipson we don't fix it.
Then help us come form. With their form-we can fix any nails and give them a perfect shape. In this case, we are talking not only about growing the free edge, but also the simulation of the ideal form.
Hence, a new term - nail modeling.
What do we get up? The nail is lengthening nail with the help of tips. And nail modeling is the correction of the natural shape of the nail and bringing it up to the ideal form for nail extension.
The modeling technology is much more complex than building on tips. But there is no limit of human possibilities =)
Nail tips.
After standard preparation procedures nails to build up comes the solemn moment of bonding))))
But before that, we need to pick up tips by size for each nail. No more, no less - any deviation from the norm affects the integrity of the architecture of the artificial nail, and consequently on his nakabalot.
Apply glue to the tips on the nail and on the tips. Gently, putting tips at an angle of 45 degrees, stick it to your nail, releasing all the air. After gluing under tipson should be no air bubbles!
Consider the following picture:
2. Next you need to shorten tips to correct length.
3. Definitely cut down type C in the area of its intersection with the natural nail, BUT! Be careful not to saw the natural nail! It has already been prepared and re-processing of files is not needed.!.
4. Matiram the remainder of tips nail file and write the approximate shape the future of the nail.
The nail is ready for the subsequent deposition of material!
Form.
Perfect nail does not happen, but everything can be improved. Forms.
When setting forms consider the following points:
1. No gaps!(Photo By Irina Shakhova)
The third production of the form - almonds, stiletto, franlinabrona nails.
4. The following nuances
- irregular, broad, irregular shape of the natural nail forces the wizard to cut the shape for tight installation to the natural nail. An example of a cutting form under an elongated, oval shape nail with the rampant hyponychium:
What conclusion can be drawn? Forms we can fix any nails and turn them into candy.
And before you will read further, I would like to make you think - is it so harmful and bad building? (Photo and the work of Natalia the Abdullin G. K)
TO
Then help us come form. With their form-we can fix any nails and give them a perfect shape. In this case, we are talking not only about growing the free edge, but also the simulation of the ideal form.
Hence, a new term - nail modeling.
What do we get up? The nail is lengthening nail with the help of tips. And nail modeling is the correction of the natural shape of the nail and bringing it up to the ideal form for nail extension.
The modeling technology is much more complex than building on tips. But there is no limit of human possibilities =)
Nail tips.
After standard preparation procedures nails to build up comes the solemn moment of bonding))))
But before that, we need to pick up tips by size for each nail. No more, no less - any deviation from the norm affects the integrity of the architecture of the artificial nail, and consequently on his nakabalot.
Apply glue to the tips on the nail and on the tips. Gently, putting tips at an angle of 45 degrees, stick it to your nail, releasing all the air. After gluing under tipson should be no air bubbles!
Consider the following picture:
1. Photo number 7 - example of correct selection and gluing tips to the nails. Boca tips from one of the sinus to the other, without air bubbles.
2. Next you need to shorten tips to correct length.
3. Definitely cut down type C in the area of its intersection with the natural nail, BUT! Be careful not to saw the natural nail! It has already been prepared and re-processing of files is not needed.!.
4. Matiram the remainder of tips nail file and write the approximate shape the future of the nail.
The nail is ready for the subsequent deposition of material!
Form.
Perfect nail does not happen, but everything can be improved. Forms.
When setting forms consider the following points:
1. No gaps!(Photo By Irina Shakhova)
2. The shape is slightly narrower than the natural nail
3. The basic principles of installation form
The first staging forms for arch forms, as well as for down-growing nails.
The second statement of the form - cabin square, ovalThe third production of the form - almonds, stiletto, franlinabrona nails.
4. The following nuances
- irregular, broad, irregular shape of the natural nail forces the wizard to cut the shape for tight installation to the natural nail. An example of a cutting form under an elongated, oval shape nail with the rampant hyponychium:
- high side bolsters and/or wide of the nail plate
Such nuances lot, under each specific case shape is cut out in its own way. The main thing that she was standing exactly on the axis of the finger, without gaps, already the natural nail (not to get flared or kegs) and most importantly - according to the chosen form of artificial nail. Because if almonds put the form exactly, when viewed from the side will not almonds, and a duck's beak.
What conclusion can be drawn? Forms we can fix any nails and turn them into candy.
And before you will read further, I would like to make you think - is it so harmful and bad building? (Photo and the work of Natalia the Abdullin G. K)
TO
AFTER
Friday, January 16, 2015
How to gel polish remove
How can remove the gel polish?
1. Sawing go over the top gel to create a groove, through which it will be easier to pass liquid for removal.
2. Cut the cotton pads to pieces, size appropriate to your nails.
3. Moisten the pieces in the liquid remover gel nail polish / bio-gel / acrylic
4. Attach a piece of moistened cotton pad with nail and Wrap with foil.
5. Wait for 7-10 minutes.
6. unwinding one finger and orange stick or pusher, remove the remnants of the coating.
7. Grind buff nails to remove residual gel varnish and / or the new treatment.
1. Sawing go over the top gel to create a groove, through which it will be easier to pass liquid for removal.
2. Cut the cotton pads to pieces, size appropriate to your nails.
3. Moisten the pieces in the liquid remover gel nail polish / bio-gel / acrylic
4. Attach a piece of moistened cotton pad with nail and Wrap with foil.
5. Wait for 7-10 minutes.
6. unwinding one finger and orange stick or pusher, remove the remnants of the coating.
7. Grind buff nails to remove residual gel varnish and / or the new treatment.
Friday, December 5, 2014
Thursday, November 27, 2014
Saturday, September 13, 2014
How to make gel nail polish was easy to remove?
To gel nail polish is easily removed, there are two ways to accomplish this light.
First. To gel lacquer is easily removed during the preparation of the natural nail to apply primer coating only on the tip of the natural nail. Indeed, in principle, it is on the tip of claw we need maximum grip material to the nail plate.
Second. After the preparation of the natural nail to cover, apply a clear lacquer, departing from the cuticle, lateral ridges and nail tips 1-2 mm. Share a transparent lacquer to dry thoroughly. After that, apply the gel-polish as usual.
Third. After the preparation of the coating is applied to the nail base gel nail polish on the lower third of the nail plate, sealing the end. Send to a lamp for 1-2 minutes. Then apply a base on the entire nail and sprinkle with powdered acrylic base. Send to a lamp for 1-2 minutes. If the powder is finely ground, then we will just plot the color, if large, then the first level the surface buff. Acrylic powder will also give fortress nail.
First. To gel lacquer is easily removed during the preparation of the natural nail to apply primer coating only on the tip of the natural nail. Indeed, in principle, it is on the tip of claw we need maximum grip material to the nail plate.
Second. After the preparation of the natural nail to cover, apply a clear lacquer, departing from the cuticle, lateral ridges and nail tips 1-2 mm. Share a transparent lacquer to dry thoroughly. After that, apply the gel-polish as usual.
Third. After the preparation of the coating is applied to the nail base gel nail polish on the lower third of the nail plate, sealing the end. Send to a lamp for 1-2 minutes. Then apply a base on the entire nail and sprinkle with powdered acrylic base. Send to a lamp for 1-2 minutes. If the powder is finely ground, then we will just plot the color, if large, then the first level the surface buff. Acrylic powder will also give fortress nail.
Friday, August 8, 2014
Subscribe to:
Posts (Atom)