The problem of extension of nails: crack, breaking, loose

Cracks emerge as a consequence of strikes naroshchennymi nails on a hard surface, in case you will be hooked and pulls a nail (in this case, it may be scrapped), with substandard or incompatible materials may burst finish.

Cracks on the sides of the artificial nail near the free edge of the natural nail caused by inappropriate forms of substitution in the modeling of the nail, when properly constructed architecture, when you saw in two sides. There are so-called jackdaws. Corrected the correct form and correct statement of sawdust.

Diagrams of are due to cracks, as a consequence of shocks or any other force effects on the nail. When properly constructed architecture artificial nail scrapping can come off with his! With the bed and "meat"!

Exfoliated primarily arise due to ill-prepared natural nail. It is important to completely remove the pterygium, because it is so to speak dead skin, which departs from the nail. If the overlay material at her, then at the commencement of the pterygium from the natural nail, automatically moves and stuff! Thoroughly cook nails to procedures!

The second reason was peeled off - it got to the cuticle and side bolsters material. On live healthy skin material does not hold, so when regrowth lag behind skin material swells on the surface of the nail and provokes further exfoliated.

Third, the most rare, it includes about 1.5% of the people - this idiosyncrasy materials, some pregnant women, in some patients taking antibiotics, or "strong" medication. Rejection of material occurs in any case, can moreover be all materials. But it is worth trying to pick up. But it nairedchayshie cases. It all depends on the master and client relationships to the nails. Nails are not a means for opening cans, bottles, packages and so on. They also like the natural nail has a tensile strength. So be careful before you blame the wizard. Perhaps this is your fault.

Every cause has already carries the solution to the problem, so you can deal with it easily enough if you care! :-)
Ошибка?

Preparation of natural nails to build

Actually I personally while preparing for increased use nail technology training coated nail gel polish. And use it as a gel, and under acrylic. About the features of later, but for now just on the standard procedure for the preparation of nails to build.

1. This item is used in general for any procedure with hands and feet. For your own safety and the safety of the client you have to treat your hands and the hands of the customer antiseptic. IMPORTANT POINT: If you are wearing gloves, then you put antiseptic on your hands, wear gloves and treat them as an antiseptic.

2. Move aside the cuticle. Orange stick will not work, especially if the cuticle is overgrown and tight to the nail. Hatchet remove pterygium. If you own the hardware manicure appliances, you can facilitate and accelerate its work using a cutter.

3. File for natural nails remove the free edge of the natural nail and remove the gloss from the nail. Remove gloss it means SLIGHTLY dull the surface of the nail. If you are unsure of your hands, take a hard buff. Too much you will not remove them.

If the building is carried out on the tips, but now it's time to glue them and treat.

4. Remove dust from the nail. Degrease the nail dehydrator.

5. Apply the primer.
      - If the building is done with acrylics, then take an acidic primer. Although now there are acid-free acrylic primers.
      - If the capacity is performed gel, then take acid-free primer

What is the difference acidic and acid-free primers? Acidic primer raises flakes natural nail that allows the material to better catch on. Acid-free primer acts as a double-sided tape, a material with interlocking nail plate.

If you build on the tips, the primer is applied only to the natural nail. In case of contact tips, nail tip could crack!

6. If the building is performed gel, then the nail rubbing movements before reaching the cuticle of about 1 mm, is applied to the base layer of gel or a single-phase gel. The nail is ready to build!

Regarding the preparation of nails to build on the training system to cover the nail gel polish. In gel lacquer base stronger adhesion compared with the base for a solid gel that eliminates detachment even in the most troubled clients! Besides it is possible to eliminate the primer is sufficient degreasing.

But there are to be two systems, and what to use - you choose.

Note: When using the gel lacquer base under the acrylic is recommended to remove her sticky layer.

What materials are used for nail?The difference between acrylic and gel. Myths and facts

In the article about the capacity we have examined than the capacity differs from modeling, what forms and tips.

Now I would like to talk about what materials you build/modeling nails.

Today there are two material - acrylic and gel. Someone might say - and how bio-gel? Because they strengthen also increasing! Yes, build up, but is this material to the category of gels. So materials still two - acrylic and gel.

Both material and gel, and acrylic polymers, which belong to the group of acrylates. Both products have a similar structure and differ only in the method of polymerization. So acryl polymerized "in the air", using thermal energy, and the gel is polymerized in the UV lamp, thanks to the added part of photoinitiators.

UV lamp for curing gel no way affects the skin, does not cause sunburn and cancer respectively. The lamp uses a completely different wavelength of ultraviolet light than the sun and does not affect the melanin in the skin. This information is for those who are afraid of the gel, and therefore bio-gel and gel-Polish - NOT DANGEROUS! Dear readers, it's not in the imagination of the author, and the banal physics))))

Why acrylic seems to be stronger than gel? In fact, the fragility of nails not so much from the material depends, how much from properly structured architecture of the artificial nail. But still, even when working with the material feeling is that acrylic is stronger gel. And this, friends, is chemistry. Different crystal lattice of the material. Here and are the myths about the "fragility" and "porosity" of the gel.

And so the myths that through these so-called pores the natural nail breathes... Nowadays I always thought that this myth can be confused brain children, who have not passed the biology course. But it turns out many adults still believe in this story.

Note the matrix is the main part of the N. It is through this area goes to nail the nutrition and oxygen. The part of the nail, which we see (nail plate) - it's dead skin cells! Dead - they do not need, nor power, nor breathing. It is for this, after, for example, poor capacity and/or remove, correct to speak not about the restoration of the damaged nail, but the full update of the nail plate. The so-called damaged part will not be restored in any way! Just crested!

Let us return to our sheep, I mean materials.

The second difference, which actually depends on the composition, it is the consistency of the material.

Gel - "ready-to-eat product, which is immediately applied to the nail and polymerized by exposure to UV rays.

With acrylic, the situation is somewhat different. Before you Cup of liquid (usually volcanica liquid) and the jar of powder. When a certain ratio of the liquid and the powder is formed of a polymeric bead, a master spread on the nail. As polymerization occurs under the influence of heat, then the master must have the skills and speed to maximize ideally put the nail as acrylic compared with the gel difficult subject "police". And of course with the gel you should try to lay out the architecture of the brush, not a file, but to correct the error with the gel easier than acrylic.

Also acrylic nails are often more expensive than gel, but not so much because of the composition, but because of the difficulty of working with the material.

As you can see, the difference in chemical and physical reactions, with the same result - in the hands of a skilled master any material you can create the most natural and masterpiece nails. Good luck with your masters!

A little about the nail. Tips and forms

"Nail" in my opinion the term is controversial. So, when are tips you can talk about the building, because the whole shape of the free edge sets us tips and change we can not do anything. What to change - if, for example, the nail grows down, then when gluing tips we get quite "pull of his hooked" nail and tipson we don't fix it.

Then help us come form. With their form-we can fix any nails and give them a perfect shape. In this case, we are talking not only about growing the free edge, but also the simulation of the ideal form.

Hence, a new term - nail modeling.

What do we get up? The nail is lengthening nail with the help of tips. And nail modeling is the correction of the natural shape of the nail and bringing it up to the ideal form for nail extension.

The modeling technology is much more complex than building on tips. But there is no limit of human possibilities =)

Nail tips.

After standard preparation procedures nails to build up comes the solemn moment of bonding))))

But before that, we need to pick up tips by size for each nail. No more, no less - any deviation from the norm affects the integrity of the architecture of the artificial nail, and consequently on his nakabalot.

Apply glue to the tips on the nail and on the tips. Gently, putting tips at an angle of 45 degrees, stick it to your nail, releasing all the air. After gluing under tipson should be no air bubbles!

Consider the following picture:

1. Photo number 7 - example of correct selection and gluing tips to the nails. Boca tips from one of the sinus to the other, without air bubbles.

2. Next you need to shorten tips to correct length.

3. Definitely cut down type C in the area of its intersection with the natural nail, BUT! Be careful not to saw the natural nail! It has already been prepared and re-processing of files is not needed.!.

4. Matiram the remainder of tips nail file and write the approximate shape the future of the nail.

The nail is ready for the subsequent deposition of material!

Form.

Perfect nail does not happen, but everything can be improved. Forms.

When setting forms consider the following points:

1. No gaps!(Photo By Irina Shakhova)

2. The shape is slightly narrower than the natural nail

3. The basic principles of installation form

The first staging forms for arch forms, as well as for down-growing nails.

The second statement of the form - cabin square, oval
The third production of the form - almonds, stiletto, franlinabrona nails.

4. The following nuances 
- irregular, broad, irregular shape of the natural nail forces the wizard to cut the shape for tight installation to the natural nail. An example of a cutting form under an elongated, oval shape nail with the rampant hyponychium:

- high side bolsters and/or wide of the nail plate

Such nuances lot, under each specific case shape is cut out in its own way. The main thing that she was standing exactly on the axis of the finger, without gaps, already the natural nail (not to get flared or kegs) and most importantly - according to the chosen form of artificial nail. Because if almonds put the form exactly, when viewed from the side will not almonds, and a duck's beak.

What conclusion can be drawn? Forms we can fix any nails and turn them into candy.

And before you will read further, I would like to make you think - is it so harmful and bad building? (Photo and the work of Natalia the Abdullin G. K)

TO

AFTER